device offline error, dev sda, sector 1852395312 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 I/O error, dev sda, sector 1852395312 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 sd 0:0:0:0: tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s usb 4-1: USB disconnect, device number 2 sd 0:0:0:0: Assuming drive cache: write through scsi 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usb-storage 4-1:1.0: USB Mass Storage device detected usb 4-1: Product: Portable USB 3.0 Drive usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-1: New USB device found, idVendor=18a5, idProduct=0237, bcdDevice=19.05 I ran dmesg but wasn’t able to capture the whole output, but the relevant part referring to the Verbatim seems to be this: usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd Lsmod | grep usb shows that module usb_storage is loaded. This morning I upgraded to Snapshot 20230929 and the problem returned. None are new, I’ve been using them for backups etc regularly. When I rolled back to the previous snapshot all was well again, so it doesn’t seem to be a hardware issue also several drives were behaving in the same way. I hope this is posted in the appropriate category.Īfter upgrading to Snapshot 20230927 I found I couldn’t mount USB hard drives if they are formatted vfat, although others formatted ext4 were mounted happily.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |